There's never been a more innovative product than Label-Form combinations. By combining labels and forms into one document, the label is generated as a by-product of the form, thereby eliminating a separate printing function for the labels. It is more efficient, and more accurate than preparing labels and forms separately.

The application for Label-Form combinations are limitless. Virtually every industry has discovered the benefits of combining labels and forms into one document. To determine if your customer has an application for a Label-Form combination, find out if they often need to duplicate or transfer information from a document to another medium. (For example, a file folder, carton label, envelope, or another form.) If so, they will benefit from the increased efficiency and accuracy of a Label-Form combination.

Brandt Affixing Inc. supplies two types of Label-Form combinations: Piggyback Labels (also called "blown on") and Integrated Labels. Piggyback labels are typically produced on a flexo label press in rolls, and then applied to the face of a form. The term "piggyback" refers to the dual ply construction of this label material. An adhesive label and an adhesive liner are applied to the form. After the form and label are printed, the top ply (adhesive label) is removed, leaving behind the adhesive liner. Integrated labels are not affixed TO the form, they are a PART OF the form. The label "image" is printed on the front of the form. A very thin adhesive liner is applied to the back of the form, and the front of the form is die-cut to create the label. To find out more about the differences between "PIGGYBACK" labels and "INTEGRATED" labels, click on the "Integrated vs. Piggyback" button above.